LM-11E
Composition and shape
At 20℃, the density is 0.73g/cm ³ to 0.75g/cm ³, the viscosity is 1.38cP, the thermal conductivity is 0.1197W/m·K, and the flash point is 62℃.
The boiling point is 189℃ and the freezing point is below -95℃. Insoluble in water, low viscosity, and chemically stable. Suitable for those sensitive to water
A waterless system. It has excellent anti-rust performance for metals such as carbon steel, stainless steel and red copper. Clean the system thoroughly before use. After drying, it can be directly added for use. The product has a certain degree of volatility. It is recommended that the system be as closed as possible. Be cautious during use Moisture enters.
Usage and application
Before operating and using LM-11E Glacier refrigerant, it is necessary to carefully read the product manual, safety data sheet and safety instructionsLabels, enterprise standards and other materials should be stored, used and operated in accordance with the requirements of the above materials. Do not contact our company Other unapproved ingredients are mixed for use.After the system confirms that there are no leakage points, clean the system thoroughly.
1.Please make sure to drain all the water and carry out drying treatment before proceeding Quickly add the refrigerant solution to the system;
2. Inject the glacier refrigerant into the system. Prevent moisture from entering during use.
3. It is recommended to install a nitrogen seal device when conditions permit.
4. Ice River refrigerant products must not be mixed with other substances. In case of any special circumstances, please contact our company in a timely manner.
5. If any system materials enter the coolant system, please contact our company immediately.